
Our surgical gloves comes in sterile / non-sterile and powdered/powder-free which features a micro-roughened outer surface that provides a good grip on your instruments, whether operating conditions are wet or dry. This optimal grip is achieved by closely controlled dosage in the final chlorination stage during manufacture, as well as online friction tests that continuously monitor grip values during and after processing.
Safe for Patients and Surgeons
Our surgical gloves offer a high-strength barrier to infection with great tear resistance. It provides an effective shield against viral penetration, as verified by extensive bacteriophage testing.
The inner coating is tough enough to withstand alcohol-based disinfectants during even the lengthiest theatre procedures.
Low Allergenicity
The glove’s synthetic inner coating acts as a barrier against potential latex allergens. A very low protein content is due to lengthy leaching processes and post-production washing cycles during manufacture. The glove’s formulation also has reduced chemical residues and is free of thiurams and MTB (mercaptobenzothiazoles).
Glove Sizes
5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0
FEATURES
Quality Standards
- Conforms to ASTM D3577 (06) and EN455 (00) Standards.
- Manufactured under QSR (GMP), ISO9001 : 2000 Quality Management System and ISO 13485:2001.
- Using FDA approved absorbable corn starch.
- Sterilized by Gamma ray irradiation.
- Bioburden and sterility tested.
- Hypoallergenic reducing potential allergic reactions.
|
|
FUNCTIONAL BENEFITS
- Extra strength provides additional protection from surgical debris.
- Fully anatomical design to reduce hand fatigue.
- Softness provides superior comfort and natural fit.
|
- Micro-roughened surface provides excellent wet and dry grip.
- Easy donning and helps prevent rolling back.
- High strength and elasticity.
|
SPECIFICATIONS
The gloves shall be sampled and tested accordingly to conform the following quality level: ASTM D3577 / ISO 2859-1:1999, Protein ASTM D5712-06, Powder Content ASTM D6124-06
1. Dimensions |
|
|
|
|
Palm Width (mm)
Length:
Thickness (Single Wall)
|
Size:
5 1/2 6 6 1/2 7 7 1/2 8 8 1/2 9
Size:
5 1/2 6 6 1/2 7 7 1/2 8 8 1/2 9
Cuff Min Palm Min Finger Tip
|
70 +/- 6 76 +/- 6 83 +/- 6 89 +/- 6 95 +/- 6 102 +/- 6 108 +/- 6 114 +/- 6
Min.280 Min.280 Min.280 Min.280 Min.280 Min.280 Min.280 Min.280
Min 0.17mm Min 0.15mm Min 0.12mm
|
2. Physical Properties |
|
|
|
|
Before Aging
After Aging
|
Tensile Strength Elongation at Break
Tensile Strength Elongation at Break
|
Min 24 MPa Min 750%
Min 18 MPa Min 560%
|
3. Powder Level |
|
|
|
|
|
|
< 15 mg/dm2 |
4. Protein Content |
|
|
|
|
|
|
< 200 ug/dm2 |
PACKAGING
FULLY PACKED
- 50 pairs per inner box
- 8 inners per carton